Eric Redd

Updated: August 19, 2022 at 7:01 PM CST

General Information

Who is Eric Redd?
Eric Redd

I am running for Sheriff of Limestone County because I care deeply about the future of our community. I love this country and the Constitution, I am an Oathkeeper and believer in upholding and defending the Constitution. If elected, I will always work to bring honesty, integrity and fiscal responsibility to our sheriff’s office.

Campaign Promise

I will create a task force with the sole purpose of stopping the manufacturing and selling of meth in our county. Many think they are untouchable because of family ties to the current sheriff’s administration;

A major problem in our country is human trafficking and pedophiles. I’ll work with other departments to put an end to our state highways and interstates being used for human trafficking;

Our sheriff’s office should have in-depth training on the Constitution. Our deputies swore an oath to uphold and defend the Constitution. It’s the foundation of our legal system and every officer should always focus on protecting our liberties;

We need an audit of the department’s budget and equipment. I’ll focus on streamlining the budget and stop unnecessary expenses such as an airplane;

All deputies should be required to wear body cameras. This will protect our officers and citizens alike. It’s an expense that could save the department a high-dollar lawsuit;

Our current sheriff’s administration often turns a blind eye to illegal immigrants driving with no insurance and false credentials. Many illegals fled their country of origin after violating their own laws. They came to the United States and are actively ignoring our laws and completely disregarding our legal system;

If elected as your sheriff, I plan to speak with legislators to pass a constitutional carry law. Permits will still be needed to cross state lines because of state reciprocity.

I’ll work to implement a better plan for school safety. Possible alternatives are deputizing, training and equipping faculty that would be unknown to the public;

Offer firearms safety and awareness training to any Limestone County citizen who wishes to can attend at no cost; and

Offer firearm safety and awareness training to every school in our county. Too many accidents happen that could have been avoided by providing our youth with common-sense gun safety education.

Eduction

U.S. Army – Alcohol and Drug Prevention Certificate, Combat Lifesaver Certificate, CPR & AED Certificate, OPFOR Academy Graduate, COB Program Specialist, and various certificates and training courses related to Terrorism/Counter-Terrorism and Insurgency/Counter-Insurgency Expert Level
Barstow Community College – Various Certifications, Criminal Justice Calhoun Community College – Various Certifications, Language ArtsHillsdale College – Constitutional Studies and Certifications

University of North Alabama – Various Certifications, Electrical Engineering & Design

Muscatine Community College – Project Management Professional Certification

Professional History

2020-Current Redline Electrical Design LLC, Owner/Operator/CEO

2021-Current Han-tec Inc. Rochester, NY
Senior Electrical Engineer – Project Lead
(Tesla, Automated Manufacturing) (Automated Cellular Battery Manufacturing Project)
Oversaw Project Budget and kept work time, equipment cost, and installation within agreed-upon cost analyzed for bid.
Responsible for the designing and updating Panel Layouts and associated Electrical Schematics, in accordance with UL and
Industry standards and policies. Supervised personnel, approved payments of vendor and contactor payment in accordance
with local, state, and federal laws and equal opportunity guidelines and policy

May. 2017-Current Bridgestone Bandag Nashville, TN & Muscatine, IA
Senior Electrical Controls Design Engineer
Supervised Project Design changes, cost analysis, the overall cost of components, manufacturing, logistics, and testing.
Responsible for the designing and updating Panel Layouts and associated Electrical Schematics, in accordance with Global
Engineering Services standards and policies. Constructed panels, wired components, and made physical changes to installed
PLC Panels and updated the affected changes to affiliated documentation per electrical code and Bridgestone Bandag
Policies and Procedures. Analyzed cost of components for projects, man-hours for fabrication and stayed within the project
budget.

June. 2020-Jan. 2021 DWFritz Portland, OR
Senior Electrical Engineer – Project Lead
(Tesla, Automated Manufacturing) (Automated Cellular Battery Manufacturing Project)
Oversaw Project Budget and kept work time, equipment cost, and installation within agreed-upon cost analyzed for bid.
Responsible for the designing and updating Panel Layouts and associated Electrical Schematics, in accordance with UL and
Industry standards and policies. Supervised personnel, and approved payments of vendor and contractor payments in accordance
with local, state, and federal laws and equal opportunity guidelines and policy.

Nov. 2015-Feb. 2017 Anderson Chavez Anderson Inc. Athens, AL
Evaluator 1
(Plant Hatch Nuclear Plant, Vidalia Georgia) (Bristol-Myers Squibb, BMS, Devens, MA.)
Evaluated individual systems at Plant Hatch (Nuclear Plant) and determined if the components in each system were to fail
what the consequences of their failure would be and what would be the impact on each Unit and the consequential down
the power that would or would not occur due to the failure of the component in the system being evaluated, or if the components
failure should/would trip the Unit which would result in costing a significant amount of profit due to downtime.
Development of the Preventive Maintenance (PM) Program and Policies for Building BDB at the Bristol-Myers Squibb
R&D Department.

Nov. 2014-Jun. 2015 Robins & Morton / Power & Industry Birmingham, AL
Senior Instrument & Controls Designer & Engineer
(Farley Nuclear Plant and other Georgia Pacific sites.)
Project lead on several projects, overseeing the budget, the scope of work, and payment from the client to personnel. Prepare and
update instrument installation drawings and PLC input/output cards and power supply drawings in accordance with
standards and policies by clients. The complete design of PLC and DCS panels, ordering of materials needed for the design and
created Bill of Materials reports for ordering and estimating the total cost of projects for clients. Created drawings, reports,
and bills of materials in accordance with Industry Standards and Federal Regulations.

Jul. 2012-Nov. 2014 Alliance Automation & Control Inc. Rogersville, AL
Senior Instrument & Controls Designer & Engineer
Collected instrumentation data from the field, P&IDs, and other resources provided by the client. Prepare and update
instrument installation drawings and PLC input/output cards and power supply drawings in accordance with standards and
policies by clients. Perform field walk-downs to verify instrumentation and associated wiring, conduit, and piping were
constructed per engineering and design. Updated drawings upon completion of construction and field walk down to
resemble the actual onsite installation. Created drawings, reports, and bills of materials for projects. Oversaw Intrinsically
Safe Equipment and Documentation in accordance with government regulation and facility procedures.

Nov. 2010-Oct. 2011 The Gochberg Group Boston, MA
Senior Instrument & Controls Design Engineer / Project Lead
Responsible for engineering-related activities in support of The Gochberg Group contracts. Scope includes but not limited to
design closure activities, design and creation of Instrument and Equipment drawings, cable and raceway update, EMPAC
component update, supporting ongoing plant maintenance activities such as instrument calibration and testing, creating
instrument data sheets all in accordance with procedure.

Aug. 2010- Oct. 2010 Anderson Chavez Anderson Inc. Athens, AL
Senior Instrumentation & Controls Technical Support
Brownsferry Nuclear Plant
Prepared and Reformatted Equipment Reliability Workbooks to ensure that all issues have been addressed and the appropriate fields have been populated for IQ Review Data Entry to go on uninterrupted and with no delays. Upload data from the Equipment Reliability Workbooks that have been created in Microsoft Excel into the IQ Review Database. Supervised proper data is being populated into the database by IQ Review Data Entry Personnel. (Brownsferry Nuclear Plant)

Oct. 2008-Jan. 2010 Southern Synergy Inc. AL and TNSenior Instrument & Equipment EngineerValero Memphis RefinerySubmitted bid for project based on cost analysis and bid on a project to catalog all equipment and instrumentation present at the Memphis Oil Refinery, then under the name Valero. Worked within the scope of budget and oversaw Project cost, personnel workload and hours invested into project time, equipment, and material. Designed and created new drawings and modified existing drawings to depict plant configurations, consisting of panels, electrical, mechanical, and structural plant configurations for piping, valves, pumps, wiring diagrams, relays, and instrumentation, to facilitate implementation of the design.

Feb. 2008-Apr. 2008 Sargent & Lundy Athens, AL Electrical Designer (Brownsferry Nuclear Plant) (Refueling Outage)Designed and created drawings and modified existing drawings to depict plant configurations, consisting of panels, electrical, mechanical, structural plant configurations for piping, valves, pumps, wiring diagrams, relays, instrumentation, to facilitate implementation of the design. Sketching out the engineers’ view of plant configuration so that they could be physically implemented using the standard and policies of TVA and the NRC for Unit 2 outage at Brownsferry Nuclear Plant.

Jan. 2007-Dec. 2008 Bechtel Power Corporation, Athens, ALInstrument & Controls Designer(Brownsferry Nuclear Plant)Designed and created new drawings and modified existing drawings to depict plant configurations, consisting of panels, electrical, mechanical, structural plant configurations for piping, valves, pumps, wiring diagrams, relays, instrumentation, to facilitate implementation of the design. Sketching out the engineers’ view of plant configuration so that they could be physically implemented using the standard and policies of TVA and the NRC for Unit 1 Restart Project at Brownsferry Nuclear Plant. Provided engineering support for the Master Equipment List (MEL) project at TVA Browns Ferry Nuclear Facility. The MEL project represented the design and operational characteristics of the as-built plant configuration and proposed design changes to the existing configuration. Trained and supervised document personnel in the system and programs involved in documentation and data entry in accordance with TVA and NRC policies and procedures.Jan.

2005-Nov. 2008 CONFIDENTIAL Worldwide, Varied Private Security Consultant(Confidential)Offered consultation using military education and training to federal, state, local governments, global commercial customers, numerous law enforcement and intelligence organizations and agencies and allied governments worldwide.

Feb. 2002-Jan. 2005 U.S. Army Ft. Knox Kentucky and Ft. Irwin, CAGunner and Squad Leader Supervised and trained the combat readiness of 10 soldiers and their combat vehicles, the M1A2 SEP Main Battle Tank. I maintained a top-secret clearance for the U.S Army and the U.S. Air Force. Instructed courses in different combat and civilian areas that were beneficial to the military and the all-around combat readiness of soldiers and their families during deployments. Expert at all weapons used in my position, along with advanced anti-terrorists training and simulation to deploy soldiers.

Organizations
Bamacarry
Alabama Cannabis Coalition
Member of the Limestone County Republican Executive Committee on and off since 2013.

Status: Out of Office
Party: Republican
Social Media:

Contact Information

Known contact information for Eric Redd from Athens, AL.

Election History

Eric Redd from Athens, AL has participated in elections listed below in the state of Alabama.

Related Articles

The below links are relevant to Eric Redd from Athens, AL and are articles or opinion pieces published on Bama Politics. Are you Eric Redd? Do you have an opinion on Eric Redd? Publish an article in our opinion section and your article will appear here. A great way for our visitors to find your content and learn more about your views. Use this contact form to find out how.

ArticleDate
No articles or news have been published on Eric Redd.
Back To Top